Remember when I told you about my Stevie throwing dust rags in the fan?
Remember this fan?
Don't you just love that brass?
That's ok. Me either!!
Remember that I have been spray painting lately?
Did you guess what I have done??
Yep, I did it! Dad & Jj took down the fans...which was a Circus in itself!
Jj brought a 12' ladder home from work. They quickly decided that one on the balcony and one on the ladder wasn't going to cut it.
So, we had to rent a 16 foot ladder! HOLY COW!!!!! It was tight quarters maneuvering that baby around in our living room.
Removing the globes helped a ton with elbow room.
They took a few blades off for opening more space too.
Then they repeated the steps for the other fan.
Prior to beginning, they turned off the breakers and checked (however they do that...I am a bit scared of electricity) to make sure they did in fact have the juice off!
SIDE NOTE: I warned Jj that if he left me a young widow in a big house, tons of miles away from our family and friends...I'd be upset! Basically, I insisted they use the breaker as an off, rather than just the switch. Let's be smart about electricity.
**And now I'm off that soap box**
Once the fans were both down, I started to take them apart.
Basically, I wanted to separate the blades because they weren't getting painted. Then, I wanted to take the main part apart as much as I could. Which basically consisted of taking off the light kit (you just unscrew it) and the blade holders (above picture).
I could have sworn I took pictures of this next part...but I guess not. I ran a light sand paper across all the surfaces just to be sure. I was using something like 220 grit; not much at all.
I laid all the pieces out on my drop cloth and commenced to painting! I dusted them with a spray paint primer (Rustoleum) because I had it and then went to Rustoleum Oil Rubbed Bronze. I did 2 coats, loosely. I say loosely because I didn't really do 2 complete coats but the second coat was more to hit the spots I missed.
After having completed the project, I would recommend priming. If nothing else, it changed all the surfaces to white so I could easily see where I needed to add a little paint.
We let them dry over night and put the fans back together. We left off 2 blades, the bulbs and globes off for ease of handling.
On to fan #2
And that's a finished project!
What do you think?
Thanks for stopping by.
What's your latest finished project? I'd love to hear all about it!
Leave me a link in the comments. I'd love to see all about it too. :)
Saturday, December 10, 2011
Subscribe to:
Post Comments (Atom)
Oh they look SO much better! I like the darker look so much more than the brass. Golly that took some serious work getting up there, but it really was worth it! :)
ReplyDeleteHugs
Missy
They look much better and might I say... JJ LOVES you...
ReplyDeleteSo much better!! I would have sprayed the blades too! To much oak could kill a person!! :)
ReplyDeleteI happen to like our oak trimmings.
Delete